Modern Flooring Options & How Much They Cost

Sweeten’s guide to flooring remodeling options and costs helps you plan & pick wisely

“After” photos by Lena Yaremenko for Sweeten

Renovating can be a big undertaking, and if your project involves remodeling an entire home, flooring installation is an important piece of the puzzle that unites the space. But when there are so many flooring options and costs, how do you pick one?

Here, Sweeten lays out the different options for flooring installation, plus factors that determine how much a flooring remodel will cost. Sweeten matches home renovation projects with vetted general contractors, offering guidance, tools, and support—for free.

Let’s examine the variables that go into remodeling floors one by one.

How much will my reflooring project cost? 

  • If the floors do not need to be replaced, a simple refinishing job can run you an average of $5 per square foot or less. In the higher range, a project with a mid-grade finish can cost $10 per square foot) to sand and refinish which also includes other factors such as removal and relocation of furniture, clean-up, and protection.
  • If you’re looking to install all new flooring, you’re looking at about $15 to $20 per square foot, for a full project using a mid-grade hardwood.
  • If you don’t need a new subfloor, the costs will be lower.
  • For luxury or other expensive materials, you’re looking at $20,000 to $25,000 for the full project.

These prices represent all-in budgets (including both materials and labor).

What does a flooring contractor do?

Flooring contractors are specialists who handle all aspects of floor refinishing and replacement. A flooring contractor should be able to help with material selection, design, removal of old floors, and installation. Some flooring contractors handle all types of floors, including vinyl and linoleum. Others may specialize in higher-end hardwood floors or custom tilework.

Flooring labor & installation costs

Your contractor will consider many variables to gauge the scope and complexity of your project and provide a total cost. As with all things renovation-related, the more complex the project, the higher the costs will run.

  • Most contractors will assess labor costs for a flooring project on an hourly basis or on a per-day basis. You may see wide variation in hourly rates; particularly low hourly rates (under $50 an hour). But beware: a low rate may signal that a contractor is not insured.

You might see a quote that sets an hourly rate of $100-$200 for each worker. Discuss rates with your contractor so that you can get a feel for what they think is needed and why. Some contractors may prefer to charge based on square footage. Sweeten contractor Thomas tells, “We typically charge about $4 per square foot for installing vinyl tile, for example, but if it’s very thick we may charge closer to $6-8 per square foot. The thicker the vinyl, the closer it becomes to a normal tile. This is because the thicker tile (whether vinyl or regular) requires it to be ‘back buttered,’ which is applying glue on the back of the tile, as well as on the floor.” More work equals a higher cost.

  • The requirements of individual buildings can play a significant role in dictating design and budget needs. Contractors who can afford to work in buildings with more extensive requirements tend to have higher operating costs that meet higher insurance requirements.
  • Refinishing floors requires fewer license and certification steps than installing floors. Many general contractors can refinish floors; those who install new floors have to go through more rigorous licensing and certification hoops.

Options for flooring: Materials and finishes

Are you starting from scratch, or rehabbing existing floors?

  • Many homes have original hardwoods that are worth reviving, but floors can reach a limit in their capacity for refinishing. If your floors have already been refinished numerous times, you might not have enough surface depth to sand down. Your GC can examine your floors and determine their thickness. 

If you decide your existing floors still have life in them, consider a more eco-friendly stain or finish. These new products help minimize fumes and are more environmentally friendly. You may need to work with your contractor to ensure that you can successfully bond newer products to older floors for an even finish. 

  • If you are working with engineered wood flooring, make sure to consult the manufacturer on whether sanding/refinishing is recommended.
  • Other materials, such as laminate, resilient (vinyl or linoleum), cannot be refinished if damaged. Chipped tile can be replaced, but only if you can find a match!

How much do you want to spend on flooring materials?

Wood/engineered wood flooring & costs

There are endless options for flooring materials, starting at $1 per square foot for laminate options, under $3 per square foot for engineered wood options, and under $6 per square foot for solid wood options. You can achieve the look of wood with laminate which can be installed in high traffic areas or where daily spills or dents might occur. 

Cost to install engineered wood

Engineered wood, a wood veneer backed by a composite like plywood giving it stability, can perform well in environments subject to moisture like bathrooms or basements.

Solid wood expands and contracts and is best in living spaces like bedrooms and living rooms. National retailers offer color and texture choices at starting price points. Reclaimed or bespoke hardwoods at boutique outlets start at $12 per square foot.

Renovate to live, Sweeten to thrive!

Sweeten brings homeowners an exceptional renovation experience by personally matching trusted general contractors to your project, while offering expert guidance and support—at no cost to you.

Start your renovation

Cost to install bamboo flooring

Although it’s actually a grass, bamboo is a great alternative to wood. It looks natural and warm, endures light to medium wear, and is easy underfoot. Most bamboo flooring is made of a bamboo veneer attached to a backing, like plywood or MDF. 

However, be mindful of quality. Bamboo gets treated with many chemicals to turn it into a material suitable for flooring, so off-gassing can be a factor. Also, as a relative newcomer to flooring, it has many manufacturing sources, and quality control is not yet highly regulated. Investigate thoroughly, as with any product you bring into your home. According to Sweeten contractor Thomas, bamboo typically runs from $8 to $15 per square foot.

Cost to install laminate flooring 

Like laminate countertops, laminate flooring is composed of dense fiberboard topped with a photographic image of real wood (or other material). It is then topped with a clear protective layer. 

Laminate flooring resists light scratching and fading from sunlight. Many manufacturers have incorporated a sound-muffling material underneath, like cork, to prevent that recognizable hollow sound. 

With no glue or nails, these floating boards connect by an interlocking tongue and groove design. The boards don’t need to be joined to a subfloor and can be installed over an uneven surface as long as it’s sealed and remains dry. The cost to install laminate flooring typically runs from $1 to $5 per square foot. 

Note: Laminate wears well, but like wood, it won’t withstand prolonged exposure to water; plus, it’s slippery when wet. Also, it’s not possible to refinish linoleum! If there’s damage, you’ll have to replace the entire board so order extra to have an exact match if needed. For more on the pros and cons on choosing this material for your floor remodel, check out our guide to laminate that looks like wood floors.  

Resilient non-wood flooring options & costs

Mostly vinyl falls into this category, but there’s also linoleum. As the term “resilient” indicates, this flooring is easy on humans when little ones fall or adults who stand for long periods. It also handles a lot of wear or sunlight and resists stains from food and drink spills as well as crayons and magic markers. Pricing for resilient (vinyl & linoleum) can vary widely, and runs from $3 to $25 per square foot. 

Vinyl plank flooring

Recent advances in manufacturing have improved the performance of vinyl plank flooring. You can now find vinyl that infuses the surface with cultured diamond particles for increased protection against dents, scratches, scuffs, and stains. Better HD printing allows it to look like wood or tile but on close inspection, you’ll know it’s vinyl. Its faux effects, however, can be part of its fashion-forward appeal. Vinyl remains probably your thriftiest choice, depending on the pattern. 

Linoleum flooring

Linoleum is a popular flooring option, due to its range of saturated colors or marbled effects, resiliency, slip resistance, and everyday wear. It comes in sheets, for an almost seamless appearance, as well as tiles if you want a classic checkerboard or just like that look. Because linoleum is made of linseed oil and other naturally-sourced materials, it is marketed as a “green” flooring choice. However, it requires chemicals to arrive at the finished, manufactured product; so understand its off-gassing and VOC ratings.

Note: They both wear well but can’t be refinished. Buy extra in case of repairs so you can match the area you need to patch.

Tile flooring options & costs 

Between ceramic and porcelain, the latter is the harder of the two and is better at handling a lot of foot traffic. Completely resistant to fading, scratches, and moisture, tile is good for a busy household. Until children are old enough where toddling and falling is not an issue, use a rug in areas where little ones congregate. Many tiles are also slip-resistant. Tile ranges from $3 to $25 per square foot, depending on the material and its construction.

Note: Dishware will break on this super-hard surface, and tile can crack if not installed by a pro on a perfectly smooth surface. 

How much flooring should you order?

Before you finalize your order, talk to your contractor or supplier about quantity. You will probably need to order 10 percent extra to make sure that you have enough materials to cover the full square footage of your space as pieces are cut down and customized. Prepare to add approximately $2 per square foot in freight costs to your budget, regardless of whether you go for bargain floors or luxe floors.

Will you encounter any lead paint?

The minute lead paint comes into the picture, the requirements and costs change. If you are tearing up old floors that were built before lead paint restrictions started, discuss the options with your contractor. Can you safely remove and discard the debris? Or will you float your new floors on top of the old floors to avoid circulating lead paint dust during the project?

You have a fair amount of choice in deciding what to spend on the various types of flooring materials. Some basic renovation costs vary based on the level of skilled labor required and the location of the project, no matter what you spend on materials. Having a good handle on the real costs involved will allow you to better align your budget, avoid surprises, and get you that much closer to your dream floor.

What does a flooring contractor do?

Flooring contractors are specialists who handle all aspects of floor refinishing and replacement. A flooring contractor should be able to help with material selection, design, removal of old floors, and installation. Some flooring contractors handle all types of floors, including vinyl and linoleum. Others may specialize in higher-end hardwood floors or custom tilework.

Adding soundproofing can bring an element of zen and privacy to your home. Read more on keeping the noise at bay.

Sweeten handpicks the best general contractors to match each project’s location, budget, scope, and style. Follow the blog, Sweeten Stories, for renovation ideas and inspiration and when you’re ready to renovate, start your renovation with Sweeten.


What does a flooring contractor do?

Flooring contractors are specialists who handle all aspects of floor refinishing and replacement. A flooring contractor should be able to help with material selection, design, removal of old floors, and installation. Some flooring contractors handle all types of floors, including vinyl and linoleum. Others may specialize in higher-end hardwood floors or custom tile work.

You may also like

Renovate with Sweeten!


We’ll match you with vetted general contractors and offer support until your project is done — at no cost to you!

Start your renovation

Customer review 5.0


“Sweeten was really helpful — we wouldn't have found our contractor without them, and the bid-leveling call was absolutely essential for us.”

— Dara R. from New York, NY

Read more reviews —>
Start your renovation

Subscribe to our
renovation newsletter